WYLER BlueLEVEL, Manual, Page: 58 / 84

page 58 of 84
G S
PECIAL
F
UNCTIONS
G1 R
ESET TO
F
ACTORY PRE
-
SETTINGS
You can reset all adjustments and settings to the factory pre-settings. For this action press simultaneously the keys
<ENTER> and <ON/MODE> until an arrow to the right hand side appears in the display.
The following values will be set and the following actions performed:
BlueMETER:
•
Filter Type 3
•
Unit mm/m
•
Display mode Absolute
•
Relative Base in millimetres, value 1000
•
Relative Base in Inch, value 10
•
All members of the wireless data transmission group are deleted
•
All members of the list of instruments are deleted
BlueLEVEL
•
Filter Type 3
•
Unit set to
o
1
μ
instrument: mm/m, 3 decimals
o
5
μ
instrument: mm/m, 3 decimals, rounded to 5µm/m
o
10
μ
instrument: mm/m, 2 decimals
•
Display mode Absolute
•
Relative Base in millimetre, value 1000
•
Relative Base in Inch, value 10
•
All members of the wireless data transmission group are deleted
•
Relative Zero is set to 0
•
Absolute Zero is set to 0
G2 F
IRMWARE
V
ERSION
With a special key operation you can read the version number of the firmware installed. After turning off the
instrument hold the <ON/MODE> key down for another 10 seconds.
The display shows in large figures the date of issue and at the bottom the version number of the firmware.