WXM HMRSNA01, User Manual, Page: 15 / 24

15
Folding the kick scooter
In order to fold the kick scooter, you should first release the folding lock (element no.
10) by pulling the lever away from the kick scooter. Next, pull the fast-folding system
lever (element no. 11).
WARNING: You must hold the handlebar with the other hand so that after you pull
the folding button it does not fall – it could cause harm to the person folding the kick
scooter or damage the product.
WARNING: Remember to close the folding lock after assembling the kick scooter.
Using the rear-wheel brake
In order to start braking, you must use your foot to step on the rear-wheel brake.
WARNING: Stepping on the brake with whole body weight when travelling at higher speeds
can cause the kick scooter to stop suddenly, what may cause loss of balance and damage
to your health.
Using the kickstand
The kick scooter comes equipped with a kickstand which can be used by pressing
it down using your foot, placing the kick scooter in a standing position. In order to hide
the kickstand, push it up using your foot towards the deck.
WARNING: Before using the product, make sure that the kickstand is hidden. Pulled
out kickstand may hit objects when the kick scooter is in motion which may lead to
loss of balance and damage to health.
Carry strap
The carry strap included in the set should be connected to the kick scooter in two
places on the handlebar. First loop is located near the attachment for handle grip
and carry strap (see element no. 2), the second one is located next to the front wheel
fender/mudguard.
WARNING:
The strap should be connected to the kick scooter only when carrying the
product. The strap should be detached and safely hidden when using the kick scooter.
Wheel replacement
In order to take the front or back wheel off, remove the fastening screw using two hex
keys – one to hold the fastening screw in place on one side of the wheel and the other
to remove it.
Bearing maintenance
Lubricating oil should be used for bearing maintenance. Replace a bearing in case
it gets knocked off the wheel axis. In case of damage, replacing the whole wheel with
a new bearing is recommended.