14
Always adjust the shoes so that gravel and stones are not fed into the snow thrower. There is a
risk for personal injury if these are thrown out at high speed.
Ensure the shoes are adjusted the same on both sides.
5. Adapt the speed so that the snow is thrown in an even stream.
If snow fastens in the chute do not try to remove it before:
- Releasing both clutch levers.
- Stopping the engine.
- Disconnecting the cable from the spark plug.
- Do not put your hand inside the chute or auger. Use the chute clearing tool supplied.
6. MAINTENANCE
6.1. MAINTENANCE SCHEDULE
Service item
Frequency
Type
Motor oil change
After 2 hours and then every
20:th h
SAE 5W30
Drive belts, check
After 2 hours and then every year.
Linkages, lubricate
Once per year
10W oil
Tyre pressure, check
50 hour
Spark plug check/replace
100 hour
Champ. N11YC, LD F7RTC
6.2SPARK PLUG
Check the spark plug once a year or every hundred hours of use. Clean or change the plug if the electrodes are
burnt. The engine manufacturer recommends: LD F7RTC or equivalent. Correct spark gap: 0.7-0.8 mm.
6.3 CARBURETTOR
The carburettor is factory set. If adjustment is required, contact an authorized service station
6.4 Safety Screw Replacement: To protect the worm-gear case at the auger, the safety screw may
become broken during use. Spare safety screws 1 and pins 2 are provided on the panel plate of the
machine for replacement.
