5
Too Low
Just R
ig
ht
Too H
igh
Paper
4
>> ADJUST THE NOZZLE HEIGHT
2
5
3
1. Go to “Calibration”.
2. Press button 5 to move the Nozzle to the middle of the build platform.
3. Use the + button to lower the Nozzle to close proximity of platform.
4. Put a paper in between the Nozzle and Platform, lower the nozzle and
feel the drag be tween paper and nozzle. At the correct height, the paper
should be able to move freely but user should able to feel a small drag from
the nozzle.
5. Note the current nozzle height and deduct the value of it by 0.5mm and
press “set”button to save the value as nozzle height (for printer with raft).
