9
Tool Specifications
Battery
A battery that is new or has not been used for a longer
period does not develop its full capacity until after
approx. 4 – 5 charging/discharging cycles.
Do not place down the battery on radiators or expose
it to intense sunlight for longer periods; temperatures
above 50 °C cause damage.
Keep the contacts/terminals of the charger and
replaceable battery clean. For optimal service life, fully
charge the battery after use.
For maximum service life of the battery, remove it from
the charger after charging.
Charging the Battery
Press the battery unlocking button
6
and remove the
battery
7
.
Charge the battery in the battery charger. When the
charging procedure is over, the charger automatically
switches to trickle charging. The LED indicator
8
lights
up.
The battery can remain in the battery charger and is
thus always ready for operation.
If the battery temperature is too high or too low, the
battery will not be charged. When the battery temper-
ature is between 0 °C and 50 °C, the charging proce-
dure begins automatically.
Reinsert the battery
7
into the screwdriver.
Maintenance and Cleaning
Before any work on the machine, remove
the battery.
For safe and proper working, always
keep the machine and ventilation slots
clean.
If the machine should fail despite the care taken in man-
ufacturing and testing procedures, repair should be
carried out by a Würth master-Service.
In all correspondence and spare parts orders, please
always include the article number given on the type
plate of the machine.
The current spare parts list for this power tool can be
viewed in the Internet under
“http://www.wuerth.com/partsmanager”
or be requested from your next Würth branch office.
Guarantee
For this Würth power tool, we provide a guarantee in
accordance with the legal/country-specific regulations
from the date of purchase (verified by invoice or deliv-
ery document). Damage that has occurred will be cor-
rected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the guarantee.
Claims can only be accepted if the power tool is sent
undisassembled to a Würth branch office, your Würth
sales representative or a customer service agent for
Würth compressed-air and power tools.
Cordless screwdriver
S 3-A
Article number
0700 102 X
Rated speed
1. gear
0 – 220 rpm
2. gear
0 – 450 rpm
Max. torque
4 Nm
Weight according to EPTA-Proce-
dure 01/2003
0.5 kg
Battery
Article number
0700 970 914
Rated voltage
3.6 V
Battery charger
AL 60-S3
Article number
0700 873
Rated voltage
3.6 V
Charging current
2.0 A
Charge duration
70 min
Weight according to EPTA-Proce-
dure 01/2003
0.4 kg
Protection class
II/
OBJ_BUCH-0000000174-001.book Page 9 Tuesday, June 17, 2014 10:50 AM
Summary of Contents for S 3-A
