wurth 0891 130 003, Translation Of The Original Operating Instructions

Page: 15 / 138

15
Note
Do not immerse the device completely
in the solvent; clean using a soft brush
or cloth.
■
Do not clean the components of the device using
wire brushes or sandpaper.
■
On no account should acids or alkaline
cleansing agents be used for cleaning.
■
If necessary lubricate the nozzle needle and air
vent rod.
■
Check the thread regularly for wear to ensure
parts such as the tank or adjustment wheel do
not unintentionally become loose.
■
After cleaning, maintenance and/or repair
work, check that all screws and nuts are securely
tightened.
Environmental instructions
Do not dispose of this device with
normal household waste. Dispose of
the device via an approved waste
disposal company or via your local
authority waste disposal facility.
Observe the currently valid regula-
tions. In case of doubt, contact your
waste disposal facility. Dispose of all packaging in
an environmentally compatible manner.
Warranty
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of purchase
through invoice or delivery note).
Damage that has occurred will be corrected either
by replacement or by repair. Damage caused by
improper handling is not covered by the warranty.
Claims under warranty can only be accepted if
the device is returned fully assembled to a Würth
agency, your Würth sales representative or an
authorised Würth customer service workshop.
Subject to technical changes without prior notice.
We accept no liability for printing errors.
Accessories and spare parts
If, in spite of careful manufacturing and test proce-
dures, the device becomes faulty, contact Würth
masterService to arrange a repair.
With any enquiries or spare parts orders, always
quote the item number as given on the device type
plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsman -
ager. Alternatively, contact your local Würth agency
for a hardcopy.
Troubleshooting
Fault Possible cause Remedy
Device does not spray when the
trigger lever [5] is pressed
No air supply Check the air supply, open the
discharge control wheel [14]
Check whether the pressure
tank is filled with product
Spraying result irregular Vertical tube dirty or blocked Clean all tubes and spray
nozzle
Never tip the device through
more than 45°
The tank cannot be unscrewed Residual pressure in the tank Pull on the ring of the safety
valve [8] (Fig. II)