MDC901-EVBHB Rev2021Jan5
MinDCet NV
Attention: Please refer to Evaluation Kit Important Notice on page 20
Page 19
Cautions and Warnings
The following conditions apply to all goods within the product series of MinDCet NV
General:
All recommendations according to the general technical usage and specifications of this guide have to be complied with.
The usage and operation of the product within ambient conditions which probably alloy or harm the component surface
has to be avoided.
The responsibility for the applicability of customer specific products and use in a particular customer design is always
within the authority of the customer. All technical specifications for standard products do also apply for customer
specific products.
Residual washing varnish agent that is used during the production to clean the application might change the
characteristics of the body, pins or termination. The washing varnish agent could have a negative effect on the long-
term function of the product.
Direct mechanical impact to the product shall be prevented as the material of the body, pins or termination could flake
or in the worst case it could break. As these devices are sensitive to electrostatic discharge customer shall follow proper
IC Handling Procedures.
Customer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-
related requirements concerning its products, and any use of MinDCet NV components in its applications,
notwithstanding any applications-related information or support that may be provided by MinDCet NV. Customer
represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate
dangerous consequences of failures, monitor failures and their consequences lessen the likelihood of failures that might
cause harm and take appropriate remedial actions. Customer will fully indemnify MinDCet NV and its representatives
against any damages arising out of the use of any MinDCet NV components in safety-critical applications.
Product specific:
Follow all instructions mentioned in the MDC901 datasheet and this technical manual, especially:
All products are supposed to be used before the end of the period of 12 months based on the product date-code.
Violation of the technical product specifications such as exceeding the absolute maximum ratings will void the
warranty. It is also recommended to return the body to the original packaging (ESD bag) and reseal the package.
ESD prevention methods need to be followed for manual handling and processing by machinery.
