Würth 0981 280 100, Operating Instructions Manual, Page: 6 / 32

6
Warranty
This Würth device is covered by warranty according
to the applicable national regulations. The warranty
period begins on the date of purchase (please retain
invoice or delivery note as proof of purchase).
Faults covered by warranty shall be eliminated by
replacement or repair. Damage caused by improper
operation is not covered by warranty.
Claims can be recognised only if the device is in a
non-disassembled state and presented to a Würth
branch office, your Würth sales representative or a
customer service office authorized by Würth.
Technical changes reserved.
We accept no liability for printing errors.
Spare parts
In the unlikely event of a failure or defect, have the
device repaired by a Würth masterService work-
shop. In all your queries and spare part orders,
always quote the product number (see type plate) of
your device.
Information for operation
Operating modes:
• Upright
• Horizontal (with upward light emission)
• Suspended (hook).
Important!
In case of exposure to splash water
connect the device only to IPX4
sockets!
Maintenance / Care
Important!
The device may only be cleaned with
the mains plug disconnected.
■
Clean the lamp with hot water, or if necessary
with usual cleaning agent.
Do not use technical solvents, acetone, ben-
zene, carbon tetrachloride etc.
■
Do not allow oils and greases to soak in for a
longer period of time.
■
A damaged lead may only be exchanged
by the manufacturer or an authorized service
company.
Environmental protection
Do not dispose of the device with
domestic waste. Have the device
disposed of by an authorised waste
management company or your
municipal waste management
organisation. Adhere to the applica-
ble regulations. In case of doubt
contact your waste management organisation.
Recycle all packaging material in an environmen-
tally friendly manner.