13
■
Press and brief touch
3
Function
BLINK
(slow continuous flashing)
activated
■
Further brief touch
3
Function
SIGNAL BLINK
(2 x flash with a
short interval) activated
■
Renewed press
3
LED lamp off
Light program
DEFENCE
■
Press
3
Function
STROBE
is activated
■
Brief touch
3
Change between the functions
STROBE
and
POWER
(full brightness)
■
Press
3
LED lamp off
If the LED lamp is in one of the four
light programs (
LOW
,
ACTION
,
SIGNAL
or
DEFENCE
), it illuminates
after a change (through rotation of the
selection ring) to another light
program.
If the light program is changed in such a manner,
the LED lamp is automatically placed in the function
in which it would have been if the light program had
been directly selected (e.g. for the
SIGNAL
light
program, the function
SOS
).
Energy modes
The LED lamp has two energy functions (energy modes):
•
Energy saving
(if the duration of light output is more important
than its brightness)
•
Constant current
(if the brightness is more important than the
duration of the light output)
Changing the energy function
(energy modes):
■
Switch off the LED lamp
■
The on/off switch
[2]
must be in the
LOW
light
program position
■
If the on/off switch
[2]
is tapped eight times
and then pressed and thereafter the brightness
suddenly increases, before it then gradually
reduces to zero, the LED lamp is in
Energy
Saving
mode
■
If the brightness remains constant for approxi-
mately two seconds after the sudden increase,
before almost instantly reducing to zero, the
lamp is in
Constant Current
mode
■
Using this procedure you can change between
the two energy functions
Focus
The LED lamp can be continuously focussed by
sliding the lamp head
[1]
forward and backwards.
If necessary a desired focus setting can be locked
using the fast lock function.
■
Turn the lamp head
[1]
to the left (lock position)
■
To release the lock again, turn the lamp
head
[1]
to the right (unlock position)
Emergency mode / emergency light
function
If emergency mode is activated, the lamp has an
emergency light function.
■
Connect the LED lamp to the connected char-
ging socket
[IV]
3
Marker light on the charging socket illuminates
in blue
■
If the mains voltage fails, the LED lamp illumi-
nates automatically
■
If the emergency light function is activated, the
LED lamp continues to shine, as soon as it is
taken out of the charging fixture
[V]
and the
charging process is interrupted
■
To activate Emergency mode, touch the on/off
switch
[2]
in the light program
ACTION
for
approximately ten seconds
3
The LED lamp illuminates for ten seconds and
then starts to flash
•
4 x flashing:
Emergency mode activated
•
2 x flashing:
Emergency mode deactivated
3
Repeat the process to change between the
activated and deactivated settings
3
The LED lamp signals this by flashing accordin
-
gly
Summary of Contents for 0827 806 004
