11
9.
Calling outside line
a.
The Command Center can connect to an outside line if a valid external line is
present. There are two ways to accomplish this:
i.
Scroll ^ (UP) or v (DOWN) to highlight the external line and press SELECT.
When you hear the dial tone, you can dial an external number.
ii.
Another (and the most common) way is to press SPEAKER ON/OFF or to lift
the handset off the receiver. When you hear a dial tone,
press 99
to get an
outside line followed by the number you wish to call.
10.
Answering outside line
a.
Answering a call from an outside line is basically the same as answering a station
call.
i.
When Command Center is ringing you have the option to pick up the
handset and talk to the party.
1.
If you would like to switch to speakerphone, press the SPEAKER
ON/OFF button and place the handset back on the receiver.
ii.
You can leave the handset on the receiver and press the SPEAKER ON/OFF
button as well to answer the phone on speakerphone.
1.
If you have answered using speakerphone button and want to use
handset, simply lift handset and continue conversation.
b.
If the call is from an S3 Communicator, you will need to press 1 to talk to the party
or 2 to listen to the site ID message if the phone is not set to immediate two-way
calling.
BASIC OPERATIONS FROM A STATION
1.
Answering Command Center call
a.
Answering a call from the Command Center depends on what device is being
called. The main devices that will be attached to the Command Center will be:
i.
S3 Communicator - you will not need to do anything at the S3C to answer
this call.
ii.
S3 Communicator Master Station - same as the standard S3Communicator,
but you can also lift the handset to talk after the call has been established.
iii.
Any POTS telephone connected to the Command Center can pick up and
have immediate two-way calling.
2.
Calling Command Center
a.
Dial extension 0 from any station connected to the Command Center.
