Set the mechanism to ‘0’ position
PRINCESS – Edition: 17.02.2005
77
FIELD SERVICE MANUAL
8.
Check the fixing of the magazines by hand.
9.
Close the mechanism housing.
10.
Set the slide switch ‘SERVICE’ on the SCC unit to ON.
11.
Power ON.
12.
Delete the stored data of the jukebox.
#
Press ‘LT’ button
#
Press ‘LT’ button again and hold it for at least 6 sec.
Followed by:
#
an automatic orientation phase
#
an automatic initialization phase
#
the display of the program version
13.
Programming
#
insert CDs if necessary
#
program number of inserted CDs in service level 1 button 5 as follows:
14.
Press selection button R -hold down- and press selection button 0 than release both buttons.
#
Press selection button 1. Service level 1 is reached. Display is: 1_ _ _.
#
To reprogram press selection button 5 -hold down- and press selection button R. Enter the
desired number of CDs with two digits. (exeption: 100 CDs = 00)
#
program options as desired
15.
Switch to normal operation mode
#
Set the slide switch ‘SERVICE’ on the SCC unit to OFF.
#
Press ‘LT’ button on the SCC unit once.
16.
Close the jukebox.
Summary of Contents for PRINCESS
Page 1: ...R 18 PRINCESS 18 ...
Page 81: ......
