Number of tracks played successively on the same disc, level 2
PRINCESS – Edition: 17.02.2005
35
OPERATING INSTRUCTIONS
9.6
Number of tracks played successively on the same disc, level 2 button 3
The display shows the maximum number of tracks played successivly from the same disc. Preset va-
lue = 04 tracks, i.e. after four tracks from this CD have been played it will be taken back to the maga-
zine, and the next CD stored in the selection memory will be played. If selections still exist for the
previous CD they will be played later.This option to limit the tracks played from one CD is more use-
ful for operators. For individual use this value can be set up to 99.
To call the service program (level 2):
1.
Set the slide switch ‘service’ at the SCC unit to ON.
2.
Press ‘LT’ button. Display shows e.g.: _ 4 0 9
#
(409 or higher = SCC program version)
3.
Press selection button R -hold down- and press selection button 0 than release both buttons.
The display is dark.
4.
Press selection button 2. Service level 2 is reached. Display shows: 2_ _ _.
5.
Press selection button 3 the display shows e.g.: 04 = factory setting for
number of tracks played successivly on the same disc.
6.
To program press selection button 3 - hold - and press selection button R.
The digital display goes dark. Enter the desired setting by means of the selection buttons with
two digits.
If you set this value to 01 all selections will be played in selection order
.
7.
To check the settings: Press selection button 3 again.
8.
To exit the service program set the slide switch ‘service’ at the SCC unit to OFF and press the
‘LT’ button once.The changer starts an initialisation run. After this the jukebox is ready to ope-
rate.
9.7
Disabling single tracks
You can disable up to maxinmum 25 different tracks of different CD's. If somebody selects a disabled
track the digital display flashes. This shows that this track is not selectable. Note a special peculiarity
at playstimulator or BGM operation. The random procedure always selects tracks out of a number of
35. If the random selected track exceeds the number of tracks on the CD the procedure starts to
count from the beginnung of the CD. Result is, if you want to disable e.g. track 8 on a CD with 17
tracks you also have to disable track 23 on this disc although it does not really exist.
To disable tracks (service program level 2):
1.
Set the slide switch ‘service’ at the SCC-unit to ON.
2.
Press ‘LT’ button.
3.
Press selection button R -hold down- and press selection button 0 than release both buttons.
4.
Press selection button 2. Service level 2 is reached. Display shows: 2_ _ _.
Summary of Contents for PRINCESS
Page 1: ...R 18 PRINCESS 18 ...
Page 81: ......