Installation manual for LED indicator
• Revision: 00 • 28/04/2021 •
© ABM Fahrzeugtechnik GmbH
Page 4 of 4
All electric wires must be laid in a manner which prevents them from bending or getting pulled during spring
deflection movements and which adequately protects them against rubbing.
After completing the work, check that all components and screws are tight and functioning correctly. Also
check the rear wheel's freewheel and the functionality of the brake system.
Afterwards, a test drive must be carried out! After completing the test drive, the tightness of all screw
connections must be checked, as well as the adequate free travel of all moving parts. Re-test the rear
wheel's freewheel and check the brake system for overheating.
Push the indicator holder onto the mirror thread and lightly
fasten using the original washer and nut.
Adjust the mirror and indicator holder as desired and fasten
the nut according to the manufacturer's specifications.
Align the indicator housing and fasten using the screw (M4).
Solder both cable ends together.
Use the heat-shrink tubing provided.
Vehicle
Indicators
Brown
Black
Blue
Yellow
Reconnect the vehicle battery.
After installation, the functioning of the vehicle must be
fully checked.
Note: For model R18, no resistors are required for the
front indicators.
4
Final check
