Installation manual for BMW R 18 from 2021
• Revision: 00 • 19/01/2022 •
© ABM Fahrzeugtechnik GmbH
Page 7 of 7
Attach the cover with the four screws provided
according to manufacturer's specifications.
The fender must not collide with other components on the vehicle, not even when fully loaded
and over the entire spring travel.
All electric wires must be laid in a manner which prevents them from bending or getting pulled
during all spring deflection movements and which adequately protects them against rubbing.
After completing the work, check that all components and screws are tight and functioning
correctly. Also check the rear wheel's freewheel and the functionality of the brake system.
Afterwards, a test drive must be carried out! After completing the test drive, the tightness of all
screw connections must be checked, as well as the adequate free travel of all moving parts. Re-
test the rear wheel's freewheel and check the brake system for overheating.
4
Final check