Installation manual for BMW R 18 from 2021
• Revision: 00 • 19/01/2022 •
© ABM Fahrzeugtechnik GmbH
Page 5 of 7
Stick the two pins into the notches of the brackets
(see image).
Insert the plate into the two brackets and attach
firmly.
Make sure that the holes are centered above the
threads.
If necessary, re-bend the plate slightly.
Insert the mesh and align at the lower bend.
There should be no or only a small gap between the
plate and the mesh.
If necessary, re-bend the mesh slightly
Mark the four fixing positions.