Wunda E06 Manual Download Page 3

3

Code pairing method

On Thermostat (E8.2RF) enter the advanced settings by first switch off thermostat by pressing         then hold         while 
switching thermostat back on       . Next Press         4 times untill the following is displayed.

On Receiver press the button for 4 secs then release, indicator A will flash green , the 
receiver is now ready to be code matched.

(NOTE: Indicator light will go out after 30 seconds of inactivity and process 
will need repeating)

On thermostat press        and         will flash 3 times and then go out, the indicator 
light A will turn back to red indicating that code match has been successful.

Selection Table

Your notes:

Parameters

Voltage : AC230V
Current : Max 3A
Wireless Frequency Output: 433Mhz
Effective Transmission Distance: 200m empty space
External Limatiation Valve : 30°C,40°C and 50°C  
(if external probe is fitted)

Factory Setting : 30°C
Limitation Switch Differentail : -2°C
Ambient Temperature : -5~50°C
Protective Housing: Ip20
Housing Material: Anti-Flammable PC

Model                Current             Output Type

E8.413RF

3A

One receiver, built-in & floor sensor

One receiver, built-in & floor sensor with potential free output

3A

E8.423RF

*All wiring must be completed by a qualified professional in line with current regulations

E06

E8.413RF/E8.423RF  Wireless Receiver (Single Zone)

✆ 

0800 5420 816

             

www.wundatrade.co.uk

THE BRAND YOU CAN TRUST

Revision Date: 30/04/2018

Reviews: