
2
The indictor A is red when power is on
The indictor A is red and flashing when receiving the wireless signal
The indictor A is green and flashing when in code pairing mode
The indictor B is green when calling for heat
The indictor B is red when set to external limitation protection
The indictor B red flashing shows a sensor error
The indictor B green flashing shows entering the external limitation value select
Press the button for 8 seconds untill the indictor B flashes green,the receiver is now in
external probe limitation setting mode.
Press the button softly to cycle between the following four states.
Indicator A - green shows external limited at 30
o
C
Indicator A - red shows external limited at 40
o
C
Indicator A - yellow shows external limited in 55
o
C
Indicator A - without light shows no external limitation set.
The receiver will save current setting automatically when nothing is pressed for 8 seconds and will
quit the limitation setting mode.
Green
Calling for heat
Red
Limitation protective
Red flashing Sensor ERR
Green flashing Selected the limitation value
Green flashing Entering limitation value selected
Red
Power
Red Flashing
Receiving Signal
Green Flashing
Code Pairing State
Green
external limited at 30°C
Red
external limited at 40°C
Yellow
external limited at 55°C
None
external limited closed
Description of work state
Limitation value select (for external probe (if used))
Indicator A
Indicator A
Indicator B
Indicator B
Button
Press for
8 sec
*All wiring must be completed by a qualified professional in line with current regulations
E06
E8.413RF/E8.423RF Wireless Receiver (Single Zone)
✆
0800 5420 816
www.wundatrade.co.uk
THE BRAND YOU CAN TRUST
Revision Date: 30/04/2018