background image

Press MONITOR button, keep in 

monitored status in 10 hours

Set the same Channel&Code as baby room, 

then you can hear the baby’s voice.

3.4.3 MONITOR

Put the intercom in the room you wish to have monitored (for example, a baby’s room), and then press 
the MONITOR button           . This intercom unit will stay in transmit mode, where it will constantly send 
audio to any intercom unit with same channel and code. The monitor function has a 10-hour time limit. If 
you need to monitor for a longer period of time, you will need to reset it again every 10 hours.

Note: 

1. Monitor can only support 1 monitor unit (receiving audio) per 1 monitored unit (sending audio). Or, 
multi-monitor (many units receiving audio) to 1 monitored unit (one unit sending audio). One monitor 
unit cannot receive audio for several monitored units that are all sending audio to it at the same time.
2. The intercom station in monitor mode is monitored side, please put the intercom closed to the 
monitored person(like baby); 
3. The monitored side(the intercom in monitor mode) can only sent voice out and can not receive any 
voice in.

MONITOR

listening

Speaking

3.4.4 VOX(Voice Operated Exchange)

Press the VOX button           on the intercom station enter VOX mode. In this mode, the screen will 
present a VOX letter.
In VOX mode, you do not need to press and hold the TALK button        to speak. Every time you want to 
speak, you will need to speak closely into the intercom station to activate it. When you are speaking 
closely into the intercom, the indicator light will turn red meaning it has successfully detected your voice. 
Any other intercom unit with the same channel and code can receive your audio message and can press 
and hold the TALK button        to answer you. Besides, other station can also enter VOX mode at the 
same time. 
When both side enter VOX mode, both of you can speak without hold the TALK button        , but please 

note:1. You need to say something(like “Hello”) to activate it before you speaking words; 2. You need to 

wait until other side finished speaking, then you can start to activate your intercom and speak in your 
side;
So it means even both side can use VOX function and speaking without hold TALK button at the same 
time, but the communication have some delay, and you need to talk one by one and keep patience.
VOX mode has a 24-hour time limit. If you need to talk with another station for a longer period of time, 
you will need to reset it again every 24 hours.
To quit VOX mode, simply press VOX button           again.

VOX

VOX

TALK

TALK

TALK

Summary of Contents for WL-888



















Reviews: