listening
listening
listening
listening
Listening
Speaking
Listening
Member A
Press and hold the GROUP button
Member B
Member C
3.4.2 GROUP
This function is used for calling all the intercom stations within a system at the same time. Press and hold
the GROUP button to speak to all the intercom stations in this system, even if they have different
channels and codes.
To confirm if an intercom station is part of your system, simply check the intercom’s frequency and code
using our frequency table (check the table in the 2.2 in this instruction manual).
GROUP
“GROUP” function update: Add a switch for GROUP function
For Wuloo intercom system have sold a huge amount in USA, so some customers will get interference
from other home or pick up strange conversation when your neighbors also bought Wuloo intercom
system. When your neighbors use “GROUP” function, you can not solve this issue by change channel or
code.
So Wuloo technology department made a update version for Wuloo intercon system, we made a switch
for GROUP function, if you get a interference and can not solve it by changing channel or code, it means
you get interference by GROUP function from your neighbors, so you can turn off the GROUP function
of your intercom units, then you can solve the interference.
Turn off the “GROUP”:
How to turn on or turn off the GROUP function:
The GROUP function is turned on by default at the factory.
Press&Hold the “GROUP” button and “VOL-” button at the same time, you will hear a beep voice, it means
you have turned off the GROUP function. After you turned off the GROUP function, when you press the
GROUP button, there is a beep voice and you can not use GROUP function anymore.
Turn on the “GROUP”:
Press&Hold the “GROUP” button and “VOL+”button at the same time, you will hear a beep voice, it means
you have turned on the GROUP function. And you can use GROUP function as before.
