FLEXCOMM
II
C-5000 (Non-Digital)
Installation Manual
150-1355-000 Rev. M
CONFIDENTIAL AND PROPRIETARY TO COBHAM
Page 129
F. Special Options (Continued)
If an operator wants to control both RT-5000's from one control head, put the Take Control switches in
the position that shows the status of both radios on the control head. Use the FM1 position on the
audio panel when talking on RT-5000 #1. Use the FM2 position on the audio panel when talking on
RT-5000 #2.
Other Key Points / Operational Considerations:
(a) At no time can both control heads EVER tune the same transceiver. Only one
control can have control of a transceiver at any time. There is no communication
between the two control heads so the head without control will not show anything
other than "NO CONTROL".
(b) Mic/Headset audio for transceiver #1 is connected to the Primary mic/headset
port of P500. To transmit on RT-5000 #1 the user must put the audio panel to the
FM1 position regardless of which control head has control of transceiver #1.
(c) Mic/headset audio for transceiver #2 is connected to the Secondary mic/headset
port of P500. To transmit on RT-5000 #2 the user must put the audio panel to the
FM2 position regardless of which control head has control of transceiver #2.
