manualshive.com logo in svg

Wuhan Guide MobIR M8, User Manual, Page: 2 / 62

Share
Download
Wuhan Guide MobIR M8 User Manual Download Page 2

                                                                                                                                       

User Manual

 

 

2

 

The Quality Management System of Wuhan Guide Infrared Co., Ltd. is approved to ISO9001:2000 for the design and manufacturig, 

stockholding, in-house repair and site servicing of non-contact temperature measuring instrumentation.   

 

Wuhan Guide Infrared Co., Ltd. reserves the right to make changes and improvements on any of the products described in this manual without 

prior notice. 

 

MOBIR® M8 

Thermal Camera complies with current European directives relating to electromagnetic compatibility and 

safety. (EMC directive 89/336/EEC; Low voltage directive 73/23/EEC). 

 

Copyright 

© Wuhan Guide Infrared Co., Ltd, 2008. All rights reserved worldwide. No parts of the products may be reproduced, transmitted, transcribed or 

translated into any language or computer language in any form or by any means, electronic, magnetic, optical, manual or otherwise, without the 

prior written permission of Wuhan Guide Infrared Co., Ltd. 

 

This manual must not, in whole or part, be copied, photocopied, reproduced, translated or transmitted to any electronic medium or machine 

readable form without prior consent, in writing, from Wuhan Guide Infrared Co., Ltd. 

Summary of Contents for MobIR M8































































Reviews:

No comments