cross should be a bright spot (please note, not all bright spots are bad pixels). You can change
the Bad Pixel Threshold by “B+” and “B-“, and also you can use the default value. Then system
will search a bright spot with the set Bad Pixel Threshold, you should judge if it is a bad pixel by
moving the camera. If it is a bad pixel, press “E+” to correct it; If not, you can pass it by pressing
“E-“. Press “SB1” to save bad pixel correction result.
Find bad pixel
,
Flickering cross
Pass bad
pixel
Current
coordinate
Threshold
Correct
bad pixel
Corrected
bad pixel no.
Fig. 9-1
22
Summary of Contents for IR136
Page 24: ...24...