pHotoFlex
®
STD
Operation
41
ba75958e07
11/2020
4.5.8
Programs
Displaying
program data
You can view the most important data of all methods.
The method data is ordered according to the program number.
4
Insert the cell (see section 4.2).
5
Set another cell with
<
V
> <
W
>
and
<START/ENTER>
as neces-
sary.
6
Start the measurement of the zero adjustment with
<START/EN-
TER>
.
After measuring, the result of the zero adjustment is displayed and
stored.
i
Zero adjust. successful!
(successful zero adjustment) or
i
Calibra-
tion error!
(zero adjustment not successful) is displayed as the result.
The zero adjustment is completed.
If
i
Calibration error!
was displayed as the calibration result, a
note automatically reminds you of another zero adjustment be-
fore the next measurement.
Measuring is not possible without a valid zero adjustment.
7
Confirm the result with
<START/ENTER>
.
The zero adjustment is completed.
The meter is ready to measure.
i
Insert zero
cell (dist. water)
Cell
16 mm
Start measurement
Zero adjust.
1
Open the menu
Configuration
/
Photometry
/
Programs
.
The display shows the most important data of the selected program.
83: A6/25 MC
0.20 - 8.00 mg/l
NH4-N
16 mm
i
Scroll with
▲
▼
Programs
Program number, test, code
Measuring range with unit
Citation form
Diameter of the cell
