wtw Oxi 3315, Operating Manual

Page: 45 / 60

Oxi 3315 Transmitting data (USB interfaces)
ba75944e02 03/2012
45
8.4 Options for data transmission to a PC
Via the USB-B interface you can transmit data to a PC. The following table
shows which data are transmitted to the interface in which way:
8.5 MultiLab Importer
With the aid of the MultiLab Importer software, you can record and evaluate
measuring data with a PC.
Data Control Operation / description
Current
measured
values of all
connected
sensors Manual  With
<F2>
/
[USB output]
.
 Simultaneously with every manual
data storage process (see section 7.1
M
ANUAL STORAGE
, page 38).
Automatic, at
intervals  With
<F2__>
/
[USB output]
.
Then you can set the transmission
interval.
 Simultaneously with every automatic
data storage process (see section 7.2
A
UTOMATIC STORAGE AT INTERVALS
,
page 39).
Stored mea-
sured values Manual  Displayed dataset with
<F2> [USB out-
put]
after calling up from the data stor-
age.
 All datasets with the
Output to RS232/
USB
function.
(see section 7.3.1 E
DITING THE MEA
-
SUREMENT DATA STORAGE
, page 41).
calibration
records Manual  Calibration record with
<F2>
/
[USB out-
put]
(see section 5.3.6 C
ALIBRATION
DATA
, page 31).
Automatic  At the end of a calibration procedure.
The following rule applies: With the exception of the menus, shortly
pressing the
<F2>
/
[USB output]
key generally outputs the display
contents to the interface (displayed measured values, measuring
datasets, calibration records).
More detailed information can be found in the MultiLab Importer
operating manual.