wtw Oxi 3315, Operating Manual

Page: 41 / 60

Oxi 3315 Data storage
ba75944e02 03/2012
41
7.3 Measurement data storage
7.3.1 Editing the measurement data storage
The contents of the manual or automatic measurement data storage can be
shown on the display.
Each of the measurement data storages has a function to erase the entire
contents.
Editing the data stor-
age
The storage is edited in the menu,
Storage & config
/
Data storage
. To open
the
Storage & config
menu, press the
<ENTER_>
key in the measured value
display.
Open the manual or automatic data storage directly with the
<RCL>
or
<RCL_>
key.
Settings
The settings are explained here using the manual storage as an
example. The same settings and functions are available for the
automatic storage.
Menu item Setting/
function Description
Data storage
/
Manual data storage
/
Display
- Displays all measurement datas-
ets page by page.
Further options:
 Scroll through the datasets with
<

><

>
.
 Output the displayed dataset to
the interface with
<F2>
/
[USB
output]
.
 Quit the display with
<F1>
/
[Zurück].
Data storage
/
Manual data storage
/
Output to RS232/
USB
- Outputs all stored measurement
data to the interface.
Data storage
/
Manual data storage
/
Erase
- Erases the entire manual mea-
surement data storage.
Note:
All calibration data remains stored
when this action is performed.