wtw Multi 3430, Operating Manual

Page: 63 / 102

Multi 3430 Operation
63 ba75865e02 12/2009
4.8 Conductivity
4.8.1 General information
You can measure the following variables:
z
Conductivity
z
Specific resistance
z
Salinity
z
Total dissolved solids (TDS)
Temperature
measurement
IDS sensors measure the temperature with a temperature sensor inte-
grated in the IDS sensor.
Preparatory activities Perform the following preparatory activities when you want to measure:
4.8.2 Measuring
You can carry out conductivity measurements as follows:
1 Connect an IDS conductivity sensor to the meter.
The conductivity measuring window is displayed.
The
Measuring cell and cell constant for the connected IDS
conductivity sensor are automatically taken over.
1 Perform the preparatory activities according to section 4.8.1.
2 Immerse the IDS conductivity sensor in the test sample.
30.09.2009 08:00 Info