wtw MIQ/24V, Operating Manual, Page: 11 / 18

MIQ/24V Installation
3 - 3
ba64114e02 08/2006
Connecting the the
24 V AC/DC line
Fig. 3-2 Connecting the 24 V AC/DC cable.
4 Open the module.
5 Screw the cable gland (pos. 1 in Fig. 3-2) with the sealing ring
(pos. 2) into the module housing.
6 Loosen the coupling ring (pos. 3 in Fig. 3-2).
7 Feed the 4 V AC/DC line through the cable gland into the
module housing.
8 Connect the wires 1 and 2 to the terminal strip. Make sure that
the cable assignment agrees with the specification on the ter-
minal label under the terminal strip.
9 Tighten the coupling ring (pos. 3 in Fig. 3-2).
1
3
2
X11 X10 X6 X9 X5 X8 X4 X7
SENSORNET 2 SENSORNET 3
RE
D R
O
T
RE
D R
O
T
S
HI
E
LD
S
CHIRM
S
HI
E
LD
S
CHIRM
GRE
E
N
GRÜN GRE
E
N
GRÜN
X3 X2 X1
SENSORNET 1
RE
D R
O
T
S
HI
E
LD
S
CHIRM
GRE
E
N
GRÜN
ON
EIN
OFF
AUS
SN
TERMINA
T
OR
24 V AC/DC
T 1,6 A
POWER INPUT