wtw MIQ/2-PR, Operating Manual, Page: 15 / 28

MIQ/2-PR Interface for the PROFIBUS
15
ba75974e01 07/2012
3.4 Setting the PROFIBUS address
Proceeding:
Setting the PROFIBUS
address on the
IQ S
ENSOR
N
ET
Please observe the operating manual of the connector.
1 Using <S>, open the
Settings
menu.
2 Press <

> and <OK> to select and confirm the menu
item,
Settings bus interfaces
.
3 Press <

> and <OK> to select and confirm the bus
interface.
4 Edit the setting table.
To accept all settings, you have to highlight the
Save and
quit menu item at the lower end of the setting table and to
confirm with <OK>. If you exit the setting table via <M>,
<ESC>/
Quit
or the
Quit
menu item, all changes are
ignored.