wtw IQ SENSOR NET System 2020 XT, Operating Manual

Page: 115 / 216

System 2020 XT C
ONNECT
Settings/setup
5 - 3
ba75970e01 10/2012
5.4 Editing the list of sensors
The
Edit list of sensors
display provides an overview of all IQ sensors,
differential sensors and inactive datasets (see section 10.4.2).
In the
Edit list of sensors
display, you can:

assign sensor names (see section 5.4.1)

delete inactive datasets (see section 5.4.1)

change the order of the display of measured values on the mea
-
sured value display (see section 5.4.2).
5.4.1 Entering / editing a name for an IQ sensor
For the easier identification of the IQ sensors and differential sensors,
you can assign an individual name to each IQ sensor.
4 Press <

> and <OK> to enter the valid password and
press <OK> to confirm. The setting is changed.
Forgotten the password? You can display the valid pass
-
word on the screen (see section 14.1).
1 Using <S>, open the
Settings
menu.
2 Using <

> and <OK>, select and confirm the menu
item,
System settings
->
Edit list of sensors
.
The Edit list of sensors display opens.
3 Using <

>, highlight the
Sensor name
column. Confirm
with <OK>.
4 Using, <

> highlight the name of a sensor and confirm
with <OK>.