manualshive.com logo in svg

wtw inoLab Multi 9310 IDS, Operating Manual

Share
Download
wtw inoLab Multi 9310 IDS Operating Manual Download Page 97

inoLab

®

Multi 9310 IDS

Maintenance, cleaning, disposal

ba75937e10

08/2021

97

14.2 Cleaning

Occasionally wipe the outside of the measuring instrument with a damp, lint-
free cloth. Disinfect the housing with isopropanol as required.

14.3 Packing

This meter is sent out in a protective transport packing. 
We recommend: Keep the packing material. The original packing protects the 
meter against damage during transport.

14.4 Disposal

At the end of its operational lifetime, the meter must be returned to the
disposal or return system statutory in your country. If you have any questions,
please contact your supplier.

4.

Set the date and time 
(see section 4.5.5 E

XAMPLE

 2 

ON

 

NAVIGATION

: S

ETTING

 

THE

 

DATE

 

AND

 

TIME

, page 25).

Dispose of used batteries according to the local regulations of your 
country. 

End users within the European Union are obligated to return used 
batteries
(even ecologically compatible ones) to a collection point set up for 
recycling
purposes. 

Batteries are marked with the crossed-out waste container
symbol. Therefore, they may not be disposed with the domestic 
waste.

CAUTION

The housing is made of synthetic material (ABS). Thus, avoid 
contact with acetone or similar detergents that contain sol-
vents. Remove any splashes immediately.

Summary of Contents for inoLab Multi 9310 IDS



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands