wtw Cond 3210, Operating Manual

Page: 32 / 48

Operation Cond 3210
32 ba75794e07 07/2017
4.4.6 Displaying calibration records
Displaying the
calibration record
The calibration record of the last calibration is to be found under the
menu item,
Calibration / Calibration record . To open it in the measured
value display, press the <CAL
_
> key.
4.5 Data memory
You can transmit measured values (datasets) to the data memory:

Manual memory (see section 4.5.1)
Measurement dataset A complete dataset consists of:

ID number

Date/time

Measured value of the connected sensor

Measured temperature value of the connected sensor

AutoRead info: AR appears with the measured value if the
AutoRead criterion was met while storing (stable measured value).
Otherwise, the
AR display is missing.

Calibration evaluation: +++, ++, +, -, or no evaluation
Memory locations The Cond 3210 meter has a measurement data memory.
4.5.1 Manual storage
You can store a measurement dataset to the data memory as follows.
7 Using <F1> / [Continue] or <ENTER> , switch to the measured
value display.
Data memory Maximum number of datasets
Manual data storage 500
1 Press the <STO> key shortly.
The menu for manual data storage appears.