Installation
Cleaning Air Box
3 - 4
ba75731e02
02/2008
General installation
instructions
Observe the following points when attaching connecting wires to the
terminal strip:
z
Shorten all the wires to be used to the length required for the
installation
z
Always fit all the ends of the wires with wire end sleeves before
connecting them to the terminal strip
z
Any wires that are not used and project into the housing must be cut
off as closely as possible to the cable gland.
z
Close all unused cable glands with blind plugs.
3.4.2
Connecting the wires
Materials required
z
Wire end sleeves, suitable for the connecting wires, with suitable
crimping tool
Tools
z
Cable stripping knife
z
Wire stripper
z
Small screw driver
Fig. 3-2
Electrical connection
3
Open the enclosure of the Cleaning Air Box.
4
Feed the power cable into the enclosure through the right-hand
cable gland.
5
Feed the control line into the enclosure through the second
cable gland from the right.
5 R2
R1
xxx
V A
C
L
N
4
3
2
1
Control
line
Power
cable
5 R2
R1
xxx
V A
C
L
N
4
3
2
1