WTI SW720HV-H.264-TI, Operation Manual

Page: 19 / 21

There are internal 120 Ohm termination resistors for both the TX and RX signal
pairs. The factory shipped default state for the 120 Ohm terminations is for both
the TX and RX terminations to be enabled. Applications that involve multiple
cameras on the same RS-485 communications lines will require that the
terminations on all cameras but one be turned off.
VIDEO STREAMING PROTOCOLS AND PORTS
The SW720HV-H264-TI camera supports the following video streaming formats
on the following ports:
RTSP Server (TCP): 8554
RTP Video Data (UDP) Stream 1: 18888
RTP Video Data (UDP) Stream 2: 18890
RTCP Video Reception Data Stats (UDP) Stream 1: 18889
RTCP Video Reception Data Stats (UDP) Stream 2: 18891
OPTIONAL ANALOG VIDEO CONNECTIONS
An optional NTSC standard definition video signal connection provide a 1Vpp
NTSC video signal with a 75 Ohm drive impedance on Pins L and A of the 18 pin
MS connector (see wiring chart).
SW720HV-H.264-TI WTI ~ Page 19 of 21