RJ-45 SERIAL DATA BREAKOUT BOX
An RJ-45 Serial Data Breakout Box is available to facilitate legacy installations that
utilize the RS-485 signals available on the SW720-H.264-SD series of cameras. The RS-
485 signals are routed on the two unused pairs in the Ethernet CAT-5e or CAT-6 cable.
Note that shielded Ethernet CAT-5e or CAT-6 cable, like Belden 1300A, should be used
for these types of legacy installations. The breakout box is wired into the system at the
cabinet end of the Ethernet cable on the RJ-45 Ethernet plug. An input RJ-45 and Output
RJ-45 connector are provided on the breakout box for passing through the Ethernet data,
and a 5 Pin Phoenix style connector interface is provided for extracting the RS-485
signals from the Ethernet cable.
SW720-H.264-SD
WTI ~ Page 20 of 27
