MOUNTING
The Sidewinder SW720-H264-SD camera should normally be mounted in an upright
orientation, as shown above. The camera may also be mounted upside down if desired,
but a cover of some sort should be placed over the bottom of the camera, extending out to
about 6 inches past the camera all around, to prevent debris, dirt or snow and ice from
accumulating on the bottom of the camera housing, since the conical shaped profile of the
camera will no longer be able to naturally shed material to the sides. The camera may
NOT be mounted with the base facing horizontally.
The base of the Sidewinder SW720-H.264-SD camera has four ¼-20 screw holes that are
equally spaced, 90 degrees apart, on a 4.75” diameter circle, as shown in figure 2 (Note
that 24VAC versions of the Sidewinder camera will have 5/16” mounting screws). If
mounting screws other than those provided with the camera are used, the length of the
mounting screws should be selected so that the screws penetrate no more than 0.75 inches
into the base.
SW720-H.264-SD
WTI ~ Page 11 of 27