Manual do Usuário | User Guide – WTA
24
SETTING AND OPERATION
Connecting the Equipment
For added safety, insert the 15Vdc power supply connector (08) into the DC
equipment input (06) located in the back section. Then plug the power supply
into the 100 ~ 240Vac electrical network using the power cable.
Charging the Battery
To fully charge the battery, keep the equipment connected to the mains for at least 8
hours, preferably with the equipment turned off. The LED Indicator (05) allows you to
monitor the charging of the battery:
- flashing red = external source (equipment without battery);
- solid red = charging battery;
- solid green = fully charged battery.
While the transporter is on, the battery charge level will be displayed along with the
temperature value of the oocytes storage block.
Temperature Adjustment
Turn the equipment on by pressing the ON/OFF button (03), the display (04) will show
the equipment name, serial number, model and when show setpoint use the "+" or "-" (01)
keys to adjust the temperature value . At the end a beep will be emitted and the value
stored for future work. Wait a few moments until oocytes storage block temperature
stabilizes.
To change the temperature value, turn off the machine and repeat the previous steps.
Date and Hour Adjustment
With the power off, press and hold the "menu" (02) and "+" (01) buttons, turn the power
on and wait for the “date and “time” setting mode to begin. Use the "+" and "-" (01) buttons