Part List
Balance .....................................................................................1 pc.
Weighing Pan .........................................................................1 pc.
Draft Shield (Model WBT-100 only) ................................1 pc.
Calibration Weight .................................. WBT-100, WBT-602
AC Adapter ..............................................................................1 pc.
Instruction Manual...............................................................1 pc.
Unpacking
Carefully unpack the balance and remove it from its
styrofoam supports. You may want to keep the original box
and packing materials for storing the balance when not in use.
If the balance is damaged contact the supplier immediately.
Keep all packing materials as they were when you received them.
Setting up the Balance
Place the balance on a level surface, free of vibration.
•
Avoid Extremes of temperature.
•
Do not place in direct sunlight or near air conditioning
vents.
•
Make sure the balance is located on a strong table and
free from vibration.
•
Avoid unstable power sources.
•
Do not use near large users of electricity such as welding
equipment or large motors.
•
Keep free from vibration. Do not place near heavy or
vibrating machinery.
•
Avoid high humidity that might cause condensation
•
Keep away from direct contact with water. Do not spray
or immerse the balance in water.
•
Do not place near open windows, air-conditioning vents
or fans that may cause a draft and unstable readings.
In order to keep you balance functioning at its best we suggest
thay you do the following:
