WST FBM200A, Operator'S Manual, Page: 11 / 40

7
The Beacon Burst log area will automatically record and log all
received 406 MHz beacon bursts. The information in this section
includes date and time of beacon burst, beacon 15 Hex ID, country
code, beacon transmit frequency, receive level of beacon signal,
and a comments field.
All of the information can be sorted by clicking on the header of the
column that you wish to sort. When a new beacon burst is received,
all of the information will be automatically un-sorted.
Click in the comments field to add or modify a comment.
The Beacon Decode area shows the decoded message details for
any selected burst.
To maximize the Beacon Monitor screen click the Full Screen
button. To un-maximize the screen press it again.
To delete records, select a record and right click the mouse, then
click
Delete record .
To delete multiple records, select individual records while holding
down the control button on your keyboard, right click and delete.
To delete a range of records select the first record, hold down the
shift key and select the last record. Right click and delete.
The selected beacon burst will have a QR Code
displayed below the Map Selections area. This QR Code contains
information about the burst including location data if present. It can
easily be read by a smart phone to make these details portable and
for use in other mapping applications.
Beacon Burst log area
Beacon Decode area
Full Screen button
Deleting records
QR Code