FRONT AXLE
L4100, WSM
6-S7
(EU)
Front Wheel and Front Axle Assembly
1. Check the front axle and engine are securely mounted on the
disassembly stand.
2. Loosen the front wheel mounting nuts.
3. Lift the front axle and remove the front wheels.
4. Remove the bracket (front) mounting screws and nuts.
5. Remove the bracket (rear) mounting screws and nuts.
6. Separate the front axle from front axle bracket.
(When reassembling)
IMPORTANT
• Be sure to adjust the front axle rocking force. (See page
9Y1210278FAS0009US0
[3] DISASSEMBLING AND ASSEMBLING
(1) Front Axle
Tie-rods
1. Pull out the cotter pin and remove the tie-rod slotted nuts.
2. Remove the tie-rod with a toe-rod end lifter.
(Code No. 07909-39051)
(When reassembling)
• After tightening the tie-rod end nut to the specified torques,
install a cotter pin as shown in the figure left.
9Y1210278FAS0027US0
Tightening torque
Front wheel mounting nut
137 N·m
14.0 kgf·m
101 lbf·ft
Bracket mounting screw
and nut
78 to 90 N·m
7.9 to 9.2 kgf·m
58 to 66 lbf·ft
Tightening torque
Tie-rod end nut
40 to 45 N·m
4.0 to 4.6 kgf·m
29 to 33 lbf·ft
KiSC issued 08, 2012 A
Summary of Contents for Kubota L4100
