Installation & Operation Manual
Wall Mounted- Outdoor Drinking Fountain
WODF-2WM Series
Willoughby Stainless Fountains
TOLL FREE
(800) 428-4065
● LOCAL
(317) 875-0830
● FAX
(317) 875-0837
Page 11
Rev. 11/2019
www.willoughbystainlessfountains.com
Troubleshooting- Fixture Plumbing
I�
Insufficient Flow
A�
Ensure the service shut-off valve is fully open (provided by installer).
B� Ensure water supply is within the normal operating range of 40-60 psi�
1�
If pressure is too low, flow can be drastically reduced.
2� If pressure is too high, the strainer and/or valve may have been damaged�
3� The unit is rated for a maximum range of 30-105 psi�
C� Inspect the unit's valve for damage, and replace if necessary�
D� Inspect the inline strainer for damage and/or clogging, and clean or replace as necessary�
E�
Check all fittings and tubing for damage and leaks. Replace components as necessary.
II� Unit has problems draining
A� Remove and clean the drain screen�
B� Remove any debris from the drain�
C�
Remove any debris from the PVC pipe and fittings.
D� Check and clear the waste trap (provided by installer)�