Wsdcam IPC-4300 Plus User Manual Download Page 121

Page: 121 / 129

Page.116.

3.7 DC12V 2A power output

When the IP tester is turned on, the DC 12V power output ON by default. The smaller end of the

supplied converter cable connects to the tester’s DC12V/2A OUTPUT and the other end connects to the

camera’s power input.

Application

Power output function is mainly used in the camera field demonstration and testing, meanwhile, for

some camera installation sites, If there is no power outlet for the adapter to power the camera, the tester

can offer temporary power for it. But we do not suggest tester supply power for a long time.

Notice:

Don’t input any power into the “DC12/2A OUTPUT” port of the tester

Man-made damage is not within our company’s warranty

The IP tester ’s power output capacity is 2A. If the IP camera uses more than 2A, the tester will

automatically enter a protection mode

Disconnect all cables from the tester and reboot it to resume using the tester.

The IPC tester power output is close to 2A, if the IP camera’s power is over 2V, the tester will

Summary of Contents for IPC-4300 Plus


































































































































Search results

Summary of Contents for IPC-4300 Plus

Reviews:

Related manuals for IPC-4300 Plus

Brands by name

Popular brands

Wsdcam IPC-4300 Plus, User Manual

Search results

Summary of Contents for IPC-4300 Plus

Reviews:

Related manuals for IPC-4300 Plus

Brands by name

Popular brands