COMPLIANCE WITH LOCAL CODES OR
INSPECTIONS IS THE RESPONSIBILITY OF
THE PURCHASER AND/OR INSTALLER
Important Installation and Utility Information
Electrical:
120V AC, 15 amp, 60 Hz: Separate and Dedicated 20 amp GFCI
This product is to be connected to a branch circuit outlet protected by a Class A GROUND FAULT CIRCUIT
INTERRUPTER (GFCI), and the GFCI shall be tested regularly for continued protection and correct operation. If a Class
A GFCI protected outlet is not available, DO NOT USE THIS PRODUCT! Please contact a licensed electrician for
installation of a Class A GFCI according to local electric codes or equivalent.
Shipping Weight:
Chair
-
160lbs
Basin
- 100lbs
Arms -
50lbs(pair)
Dimensions:
Upright and Retracted:
51in X 34in X 54in
Upright and Basin Extended:
68in X 34in
X 54in
Reclined and Basin Extended:
81in
X 34in X 40in
Weight Capacity:
350lbs
Basin Capacity:
Diamond Bowl
–
5.25 Gallons
Crystal Bowl
–
6 Gallons
Plumbing:
Water Supply Lines:
Hot/Cold supply lines are 1/2” with standard faucet fitting
Drain Pipe Outlet:
1” Schedule 40 PVC Coupler
Gravity type drainage systems do not require back flow fitting, Optional discharge pump/wall drain systems require a check
valve to be installed at the drain pipe outlet after the telescopic drain pipe. Use 1” PVC slip check valve.
All plumbing connections must conform to local codes. Normal water pressure of 30 to 80 PSI is required to correctly fill
the basin to the proper level. The hot water supply temperature must not exceed 150 F (65 C). Adjust your hot water
heater accordingly. Carefully connect the incoming water supply lines to the appropriate fittings located on the back of the
pedicure spa. Shut-off valves are recommended.