3
4
number the monitors with the socket from 1~6. The
way
of
numbering
is
:
adding
the
number
which
the
socket
represent to, then add 1 to the sum
you got. The final sum you get is the coded number of the monitors.
The
number
the
socket
represent to is as following:
Socket: 1
2
3
4
5
6
Number: 1
2
4
8
16
32
For example: If you want to number a monitor as Monitor 1, then do not plug
the short circuit chip for any socket from 1~6. If you want to number a
monitor as Monitor 16, then switch Socket 1,2,3,4 to “NO”(because 1+2+4
+8=15).
If
there
are
more than one monitors in one family, then number the monitors
as the same.
※
Answering
calls
from
the
front
door
camera
When there is a call received from the camera,
the image from the Door Station will auto-display on the screen.
To talk with the visitor, press “ ” button. The conversation time is limited
to 2 minutes.
To release the electric lock for the visitor, press “ ”button.
To end the conversation, press “ ” button.
If there is no answer for the call within 30 seconds, the display will shut off
automatically after 2 beeps.
※
Calling Other Door Phone(s)
When in standby, press“ ”button, you can call other door phone(s) conne
-cted.
If busy tone is heard, please try again later. The chime tone last about 30
seconds if nobody answers the call.The max conversation time is 2 minut
-es. To end the conversation, press “ ” button.
※
Answering Calls from Door Phone
When there is a call received from one of the door phones,all other door
phone(s) connected ring at the same time and there are no image on the
screens. To answer the call, press “ ” button.
The max conversation time is 2 minutes. To end the conversation,
press “ ” button.The conversation will end with two beeps.
※
Monitor
You can monitor the sound and doorway image captured by the cameras
for up to 1 minute. There is an impedance selection socket in the back
side of the door phone, If there is only one video door phone connection,
please do remember to plug in the jumper. If more than one video door
phones connected, please plug in the jumper for the video door phone of
longest wiring distance and do remember to remove the jumpers for others.
When
in
standby
,
press “
”
the
image
from
camera 1
will
appear
on
the
screen
;
press “ ”
button
again
,
the
monitoring
will
shut
off
.
Within
10
seconds
,
press “ ”
,
the
image
captured
by
the
Camera
2
will
appear
on
the
screen
.
In
monitoring
status
,
you
will
hear
busy
tone
when
you
call
the
door
phone
from the camera.
Voltage
Input...........................+12VDC
Standby Current.......................
7 mA
Working
current.......................
65 mA(
/
W)/
380mA( olor)
CD
Screen.............................4
.
0
"
esolution...............................105600dots
................................
20mV
.................................
5%
.............................
70dBA
Power
Input.............................
≥
5mW
umidity..................................45
%
95
%
5.Specification
：
≤
0
≤
0
B
≤
C
L
R
Sensitivity
≤
Distortion
≤
Sound Level
≥
H
～
