background image

 

 

 

 

 
 
Wright Manufacturing, Inc. (hereinafter: WMI) warrants to the original owner that 
the new WMI mower accompanying this document will be free from 
manufacturing defects in materials or workmanship subject to the following 
limitations and exclusions.  Any part of the WMI commercial mower 
manufactured by WMI and found, in the reasonable judgment of WMI, to be 
defective in materials or workmanship, will be repaired or replaced by an 
Authorized WMI Service Dealer without charge for parts and (except as 
excluded below) labor.  This Warranty is limited to the original Owner and the 
mower this document was provided with and is not transferable.  Dealer demo 
units with less than fifty hours when first retailed shall also be covered by this 
limited warranty.  Proofs of Purchase, Authorized Dealer performed Pre-Deliver 
Service and the First Eight Hour Service will be required by the Authorized WMI 
Service Dealer to substantiate any warranty claims.  All WMI warranty work 
must be performed by an Authorized WMI Service Dealer and item must be 
delivered to the dealer prior to the expiration of the warranty period.  This 
Warranty is limited to the following specified periods from the date of the original 
retail purchase for defects in materials or workmanship and will commence upon 
the date of original retail purchase.  This warranty shall apply only if the warranty 
registration form has been completed and returned to Wright Manufacturing, Inc. 
within 30 days from the date of original retail purchase. This warranty includes 
only the cost of parts and labor (when applicable).  This warranty applies only to 
the replacement of defective or otherwise warrantable WMI OEM parts being 
replaced with WMI OEM parts. 

 

 

All parts and components (except as noted below) – 2 years  

 

Belts – 90 days  

 

Battery – 90 days 

 

Engine – warranty covered by engine manufacturer and handled 
through the respective Authorized engine Dealers 

 
Exclusions: 

Any damage or deterioration due to normal use, wear and tear or exposure 
All filters, engine oil, hydraulic oil, tires and tubes 
Bent, fractured or broken parts occurring through impact or hard use 
Clutch: linings, anti-rotation failure or other failure due to improper 

replacement installation 

Cost of regular maintenance service, parts or adjustments 
Worn bearings (other than spindle bearings; see above) 
Worn bushings, cotters, clips, pins and retainers 
Grease fittings/zerks 
Paint, paint fading, cosmetic imperfections and steel surface imperfections 
Fabric, cushion and rubber grip wear or damage 
Cutting blades, light bulbs, fuses 
Damage due to loose pulleys on shafts 
Damage due to loose wheel hubs on tapered hydraulic motor shafts 
Fire Damage 
Abrasion or corrosion wear or damage 
 

Repair Parts Replaced During Original Warranty 

All Repair parts (excluding wear or otherwise excluded items) 

installed during the warranty period are warranted until the end of 

the respective original period according to the categories above 

except in the case that the respective original warranty period 

expires in less than ninety (90) days after the installation of the 

part(s).  If this happens then the parts are warranted for a total of 

ninety (90) days from the time of their installation. 

 
Rental Use 

The above warranty periods are limited to maximum of ninety (90) 

days for mowers that are used for rental purposes. 

 

 
 
 

 

WRIGHT MANUFACTURING, INC. POWER EQUIPMENT LIMITED WARRANTY 

THIS WARRANTY SUPERSEDES ALL PREVIOUS ON UNITS WITH A RETAIL SALES DATE ON OR AFTER 

The WMI mower, including any defective part, must be returned to an 
Authorized WMI Service Dealer within the warranty period.  The expense of lost 
production time and delivering the mower to the Authorized WMI Service Dealer 
for warranty work and the expense of returning it to the Owner after repair will 
be paid for by the Owner.  WMI’s responsibility is limited to making the required 
repairs and no claim of breach of warranty shall be cause for cancellation or 
rescission of the contract of sale of any WMI mower.  This Warranty does not 

apply to any mower that was delivered to an Owner prior to the Pre-Delivery 
Service as specified in the Owner’s Manual.  This Warranty does not apply to 
any mower that was shipped in a crate to the Owner or delivered to the Owner 
by non-employees of an Authorized Dealer.  For the Owner’s protection and a 
valid Warranty, please note:  WMI does not permit Authorized Dealers to make 
non-face-to-face deliveries of the mower and any who are found doing so are 
subject to immediate cancellation as Authorized Dealers.  This Warranty does 
not cover any mower that has been subject to misuse, neglect, negligence, 
burning in any fire, an accident, or that has been operated or maintained in any 
way contrary to the operating and maintenance instructions as specified in the 
Owner’s Manual.  The Warranty does not apply to any damage to the mower 
that is the result of improper maintenance, or to any mower or parts that have 
not been assembled or installed as specified in the Owner’s Manual.  The 
Warranty does not cover any mower that has been altered or modified changing 
performance or durability.  In addition, the Warranty does not extend to repairs 
made necessary by normal wear, or by the use of parts or accessories which, in 
the reasonable judgment of WMI, are either incompatible with the WMI mower 
or adversely affect its operation, performance or durability. 
 
WMI reserves the right to change or improve the design of any mower without 
assuming any obligation to modify any mower previously manufactured. 
 
All other implied warranties are limited in duration to the two (2) year warranty 
period or ninety (90) days for mowers used for rental purposes.  Accordingly, 
any such implied warranties including merchantability, fitness for a particular 
purpose, or otherwise, are disclaimed in their entirety after the expiration for the 
appropriate two (2) year or ninety (90) day warranty period.  WMI’s obligation 
under this Warranty is strictly limited to the repair or replacement of defective 
parts and WMI does not assume, or authorize anyone to assume for them, any 
other obligation.  Some states do not allow limitations on how long an implied 
warranty lasts, so the above limitation may not apply. 
 
WMI assumes no responsibility for incidental, consequential or other damages 
including, but not limited to, expense for gasoline, expense of delivering the 
mower to an Authorized WMI Service Dealer and expense of returning it to the 
Owner, damage by fire, mechanic’s travel time, telephone charges, rental of a 
like product during the time warranty repairs are being performed, travel, loss or 
damage to personal property, loss of revenue, loss of use of the power 
equipment, loss of time or inconvenience.  Some states do not allow the 
exclusion or limitation of incidental or consequential damages, so the above 
limitation or exclusion may not apply. 
 
This Warranty gives you specific legal rights, and you may also have other rights 
which vary from state to state. 
 
This Warranty applies to all WMI mowers sold in the United States of America 
and  
Canada.

 

 

For the location of the Authorized WMI Service Dealer nearest you or other 
information, such as, Parts Lists and Owner’s Manuals visit our website 
at: 

www.wrightmfg.com

 

 

 

Wright Manufacturing, Inc. 

4600-X Wedgewood Blvd. 

Frederick, MD 21703 

Summary of Contents for V-TURN























Reviews: