English
11
10
Press the setup button on the rear
of the product two times. The WiFi
indicator will blink amber two times,
then pause every second. The speaker
is now in WPS Mode.
Plug in the Wren V5PF speaker near
your router. Wait approximately
20 seconds for the speaker to fully
power on (when the power indicator
light stops blinking).
Problem connecting? Visit wrensound.com/support for additional help.
Place your router in WPS Mode.
Usually this is done by holding the
router’s WPS button, but check
your router owner’s manual.
When the secure connection is made,
the Wren V5PF’s WiFi indicator will
stop blinking and remain steadily lit.
WiFi Protected Setup (WPS) is a feature on some WiFi routers that allows the Wren V5PF
speaker to automatically and securely connect without needing to enter a password. WPS is
not a standard feature on all routers, and only one Wren V5PF speaker can be set up at a time.
Check your router’s owner manual to see if WPS is a feature, or look for a button on your
router marked with the WPS logo
. If your router does not have WPS, then use Standard
WiFi Setup. (See “Option A” in the prior section.)
If your router has WPS, you can follow the WPS instructions in the Wren Play-Fi App, or use
the following instructions.
WiFi Protected Setup (WPS) using an
Android smartphone or tablet
Connect to your network —
Option A
solid white
blinking
amber
solid
white
How To Exit WPS Mode
If you ever need to exit WPS Setup Mode,
press the WiFi button once. The speaker
will then return to its previous mode.
amber
Summary of Contents for V5PF
Page 1: ...V5PF Setup Guide...
Page 10: ...18 19...
