Wren Turbines Ltd. MW54 Mk2 & Mk3 Turbo-Jet, kit assembly instructions, Jun 2004
Page 19
Step 63.
Fitting pod starter.
Slide motor into place fully and pull
back approx 1mm. Nip into place by
tightening M2.5 cap screw.
Step 64.
Fitting pod starter.
Check operation be connecting switch
start lead and battery. Action should
be clean and “snappy”. Ease pod
position if clutch sticks at all.
Step 65.
Completing pod starter.
Once correct operation is confirmed,
the black cap can be eased into place.
A filter screen cover can also be fitted to
engine. Provides mounting for on-board
starter. Suits direct switching (7.2V) or
Autostart ECU. Pipes exit at bottom. Fit
as for pod starter.
Not Used
Not Used
Not Used
Not Used
Summary of Contents for MW54 Mk2
Page 1: ......
