Wren Kitchens WALL UNIT 672 L Corner, Assembly Manual, Page: 9 / 12

WALL UNIT
672 L Corner
Assembly Guide
For Internal Use: FI.WR.INS.038_WKIN00128_WALL720_672_LCnr_Rev4.indd
Page 8
Step 24.
Align corner post to frontal. Equally space
2 x fixing plates (U) to the back of frontal
& corner post.
Ensure a 3mm gap is maintained
between frontal & post
once fixed together.
Screw in place using
4 x 15mm screws
(L)
per fixing plate (U) .
U
U
Step 25.
Secure hinges by tightening
2 x screws with hinge dowels
attached. These are already
positioned within the hinges.
Step 26.
Attach the door to unit
where required.
To attach door
clip hinge onto hinge
plate and click to secure.
Hinge Cover Caps
Step 27.
Adjust hinge to suit. As shown below.
Hinge Plates
View from Inside of Carcass
To
adjust
hinge using a screw
driver, tighten or loosen as
required at points
1
&
2
.
Point
1
- In - Out
Point
2
- Left - Right
1
2
FRONTAL HINGE
ADJUSTMENT
To Release door
Pull catch as shown,
to release hinge
from the hinge
plate.
L
L
L
L
L
L
L
L
The top and bottom
hinges MUST be
adjusted to the SAME
STRENGTH.
Step 28
Fit cover caps to hinge.
Adjust Softclose to suit.