Wren Kitchens WALL UNIT 672 L Corner, Assembly Manual, Page: 8 / 12

WALL UNIT
672 L Corner
Assembly Guide
For Internal Use: FI.WR.INS.038_WKIN00128_WALL720_672_LCnr_Rev4.indd
Page 7
Step 22.
Using points a, b & c adjust the
Cabinet to suit.
Hanging
Bracket
viewed though
Back Panel
C
a
b
Step a.
Rotate the screw clockwise
to move the cabinet up.
Anti-clockwise for down.
Step b.
Adjust the depth
using centre
screw.
Step c.
Screw the red screw until it
touches the plate to lock
in position.
b
c
a
Step 23.
Screw into any side units using the provided 2x
30mm screws
(K) to secure the unit. Screw just to the
rear of the hinge plate then place a cover cap on the
head to conceal it.
K
Step 20.
Measure appropriately and attach the 3 x hanging bracket plates onto the
wall screwing through the provided holes into your wall.
Screws for fixing to walls are not provided as these vary depending
on your wall material and construction. Ensure appropriate fixings for
wall construction are used.
Step 21.
Hang the cabinet using the brackets to hook onto
the plate as shown
Hanging Bracket
Plate