Page 12 of 12
General Storage Guidelines
Upon receipt of parts or assemblies, they should be inspected for corrosion or other related
damage. If any problem is detected, contact
WPT’s warranty department.
It is the
owner’s
primary responsibility to store and protect the WPT product.
Products should be stored in a manner that it is protected from the environment and outside
sources, which may include but are not limited to the following:
•
Environmental storage requirements should be maintained as follows:
o
No exposure to rainwater
o
Temperatures 32F° (0C°) to 110F° (43C°)
o
Below 50% average humidity
o
Average sunlight
•
Hazards that require addition protection:
o
Dust and debris
o
Oil, water, saltwater, acids, or other chemicals
o
Any other foreign items which may damage the product
o
Other measures include covering the product to prevent ingress
of foreign matter
•
Additional Protection Measures for Long-Term Storage
(For storage exceeding one month):
o
Coat exposed metal with Cosmoline RP-342 "HEAVY" Military-Grade Rust
Preventive Aerosol Spray, or equal
o
Coating of painted surfaces is not required or recommended
o
Visually inspect the product for degradation once every three-months
STORAGE
