Page
5
of
39
WIM-TD-002_C
1.1 PRODUCT DESCRIPTION
The WPT
Pilotless™ Mechanical Power Take-Off (PTO) consists of a lever-actuated clutch with a shaft
and bearings mounted in a rigid housing. The mechanical PTO is designed for inline and sideload
applications on all internal combustion engines with standard SAE industrial flywheel and flywheel housing
dimensions.
WPT mechanical
PTO’S fit standard SAE housing sizes #6 thru #0. Various units are available in variety of
sizes and quantities of friction discs. Two bearings are used to distribute the applied load. Two types of
mechanism styles are available in the WPT mechanical
PTO’s “C” & “SP”. WPT has a sliding sleeve
assembly using a sealed ball bearing.
WPT mechanical
PTO’s nomenclatures are interpreted as such, “314 Mechanical PTO” indicates that there
are three 14
” diameter Center Plates.
The WPT PTO is the most rugged PTO available on the market today. Follow the procedures detailed in
this Installation Maintenance Manual for years of service.
When performing installation and maintenance functions, refer to the drawings in this manual on pages 6
thru 13. The references on the drawings in this manual DO NOT correspond to the references on the
assembly drawing and Bill of Materials. Do not use the item numbers from the drawing in this manual for
ordering parts.
Recommended spare parts should be stocked by the customer. This will greatly reduce the possibility of
costly downtime. Most wear items are normally stocked at the factory or local distributor and can be
shipped quickly from stock. When ordering parts, use the part numbers from the Bill of Materials supplied
with this unit. Also, please include the part number and the serial number from the unit itself, this
information will be found on the metal hand hole cover on the bell housing (see example below). Your
WPT Distributor can provide a copy of the Bill of Materials if the one provided should become lost.
Example Only, reference nameplate on PTO for correct information.
.
